How To Install Cycle Computer

Bike handlebars with a speedometer

Prototype Credit: andreusK/iStock/Getty Images

Bike speedometers are pocket-size computers that attach to your bicycle to mensurate the rotation of your tires. The computer takes information from sensors located on your wheel tire and calculates your speed. These computers often provide other information such as your altitude, the time, your centre rate or the distance. Installing a speedometer is simple even if you are not a bicycle mechanic, simply y'all must program your figurer properly to obtain an accurate speed from the sensors. If you are not confident in your power to install a bicycle estimator, accept your bike and computer to a bike shop.

Step ane

Attach the computer sensor to the fork opposite your brakes on the front wheel mount. You tin can adhere the sensor at any point along the fork, so cull a location that will be piece of cake for y'all to access. If your sensor did not include any specific attachments, secure the sensor in place with a cablevision tie.

Step 2

Run the wire from the sensor upwards the back and outer part of your daze absorber. This location volition protect the wire from branches or undergrowth that y'all may bike through while also keeping the wire away from the bicycle in motion.

Footstep 3

Attach the reckoner mount to your handlebars in a location that is easy for you to see. The figurer'due south brandish will get in this mount, so information technology must be in a location that is easily visible. Every computer mount includes slightly dissimilar hardware, and then secure the mountain in accordance with your calculator's design.

Step 4

Secure the wire that connects the sensor and the estimator mount to your bike frame with cable ties. Add a cable tie to whatever location where it looks like the wire may dangle or bow out from the frame. Leave enough slack in the wire so your front wheel and handlebars can plough freely.

Step 5

Clip the included magnet to the spokes of your front tire in a place where it will pass by the sensor each fourth dimension your tire rotates. The sensor knows your tire has fabricated one complete revolution each time information technology senses the magnet, so it is vital the magnet passes inside most 1/4 inch of the sensor.

Step 6

Enter the bore of your front bicycle tire into the estimator. This data is usually printed on the tire itself or volition appear in your bicycle'southward user manual. Your figurer must know the tire diameter in order to calculate your speed accurately.

Step 7

Turn the tire to ensure the computer sensor is detecting the magnet as it goes by. Your computer brandish will show a nonzero speed value if the sensor is working correctly.

Tip

Exam the accuracy of your speedometer by cycling next to someone who is also using a bike reckoner. Your speeds should roughly equal the speeds the computer displays. If the information is essentially different, y'all may have made an fault when inputting the diameter of your tire.

Source: https://www.livestrong.com/article/261514-install-bicycle-speedometer/

Posted by: butlermiltured.blogspot.com

Share this post